| 2.756 Inch | 70 Millimeter x 4.921 Inch | 125 Millimeter x 0.945 Inch | 24 Millimeter LINK BELT MR1214EX Cylindrical Roller Bearings | da:215.9 mm; Da:359.999 mm; Ca:107.798 mm; A1:203.2 mm; A2:358.775 mm; ba:89.694 mm; H:419.1 mm; H1:209.55 mm; H2:85.725 mm; J min.:571.5 mm; J max.:635 mm; J1:127 mm; L:749.3 mm; N1:34.925 mm; R1:122.237 mm; R2:42.862 mm; RG:1 NPT; PG:1/4 NPT; h:56.356 mm; Housing:SAFS 048 KA; Stabilizing ring:2 x A8897; Taconite seal:TER 551; End plug (suffix Y):X-5217-4; Max. speed for Taconite seal:340 r/min; P60°:557 kN; P90°:334 kN; P120°:207 kN; P150°:185 kN; P180°:222 kN; Pa:66.7 kN; Mass pillow block:245 kg; Cap bolt:1 1/4-7 UNC; Cap bolt recommended tightening torque:2467.6 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.25 in; Initial grease fill:2154.6 g; |
| 3.543 Inch | 90 Millimeter x 4.03 Inch | 102.362 Millimeter x 0.945 Inch | 24 Millimeter LINK BELT MA61018W935 Cylindrical Roller Bearings | da:215.9 mm; Da:359.999 mm; Ca:107.798 mm; A1:203.2 mm; A2:358.775 mm; ba:89.694 mm; H:419.1 mm; H1:209.55 mm; H2:85.725 mm; J min.:571.5 mm; J max.:635 mm; J1:127 mm; L:749.3 mm; N1:34.925 mm; R1:122.237 mm; R2:42.862 mm; RG:1 NPT; PG:1/4 NPT; h:56.356 mm; Housing:SAFS 048 KA; Stabilizing ring:2 x A8897; Taconite seal:TER 551; End plug (suffix Y):X-5217-4; Max. speed for Taconite seal:340 r/min; P60°:557 kN; P90°:334 kN; P120°:207 kN; P150°:185 kN; P180°:222 kN; Pa:66.7 kN; Mass pillow block:245 kg; Cap bolt:1 1/4-7 UNC; Cap bolt recommended tightening torque:2467.6 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.25 in; Initial grease fill:2154.6 g; |
| 2.953 Inch | 75 Millimeter x 3.504 Inch | 89.014 Millimeter x 0.984 Inch | 25 Millimeter LINK BELT MR1215 Cylindrical Roller Bearings | da:215.9 mm; Da:359.999 mm; Ca:107.798 mm; A1:203.2 mm; A2:358.775 mm; ba:89.694 mm; H:419.1 mm; H1:209.55 mm; H2:85.725 mm; J min.:571.5 mm; J max.:635 mm; J1:127 mm; L:749.3 mm; N1:34.925 mm; R1:122.237 mm; R2:42.862 mm; RG:1 NPT; PG:1/4 NPT; h:56.356 mm; Housing:SAFS 048 KA; Stabilizing ring:2 x A8897; Taconite seal:TER 551; End plug (suffix Y):X-5217-4; Max. speed for Taconite seal:340 r/min; P60°:557 kN; P90°:334 kN; P120°:207 kN; P150°:185 kN; P180°:222 kN; Pa:66.7 kN; Mass pillow block:245 kg; Cap bolt:1 1/4-7 UNC; Cap bolt recommended tightening torque:2467.6 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.25 in; Initial grease fill:2154.6 g; |
| 1.575 Inch | 40 Millimeter x 3.15 Inch | 80 Millimeter x 2.375 Inch | 60.325 Millimeter LINK BELT MA6208TV Cylindrical Roller Bearings | da:215.9 mm; Da:359.999 mm; Ca:107.798 mm; A1:203.2 mm; A2:358.775 mm; ba:89.694 mm; H:419.1 mm; H1:209.55 mm; H2:85.725 mm; J min.:571.5 mm; J max.:635 mm; J1:127 mm; L:749.3 mm; N1:34.925 mm; R1:122.237 mm; R2:42.862 mm; RG:1 NPT; PG:1/4 NPT; h:56.356 mm; Housing:SAFS 048 KA; Stabilizing ring:2 x A8897; Taconite seal:TER 551; End plug (suffix Y):X-5217-4; Max. speed for Taconite seal:340 r/min; P60°:557 kN; P90°:334 kN; P120°:207 kN; P150°:185 kN; P180°:222 kN; Pa:66.7 kN; Mass pillow block:245 kg; Cap bolt:1 1/4-7 UNC; Cap bolt recommended tightening torque:2467.6 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.25 in; Initial grease fill:2154.6 g; |
| 2.362 Inch | 60 Millimeter x 4.331 Inch | 110 Millimeter x 0.866 Inch | 22 Millimeter LINK BELT MR1212TV Cylindrical Roller Bearings | da:215.9 mm; Da:359.999 mm; Ca:107.798 mm; A1:203.2 mm; A2:358.775 mm; ba:89.694 mm; H:419.1 mm; H1:209.55 mm; H2:85.725 mm; J min.:571.5 mm; J max.:635 mm; J1:127 mm; L:749.3 mm; N1:34.925 mm; R1:122.237 mm; R2:42.862 mm; RG:1 NPT; PG:1/4 NPT; h:56.356 mm; Housing:SAFS 048 KA; Stabilizing ring:2 x A8897; Taconite seal:TER 551; End plug (suffix Y):X-5217-4; Max. speed for Taconite seal:340 r/min; P60°:557 kN; P90°:334 kN; P120°:207 kN; P150°:185 kN; P180°:222 kN; Pa:66.7 kN; Mass pillow block:245 kg; Cap bolt:1 1/4-7 UNC; Cap bolt recommended tightening torque:2467.6 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.25 in; Initial grease fill:2154.6 g; |
| 2.756 Inch | 70 Millimeter x 3.337 Inch | 84.772 Millimeter x 0.945 Inch | 24 Millimeter LINK BELT MR1214C3959 Cylindrical Roller Bearings | da:215.9 mm; Da:359.999 mm; Ca:107.798 mm; A1:203.2 mm; A2:358.775 mm; ba:89.694 mm; H:419.1 mm; H1:209.55 mm; H2:85.725 mm; J min.:571.5 mm; J max.:635 mm; J1:127 mm; L:749.3 mm; N1:34.925 mm; R1:122.237 mm; R2:42.862 mm; RG:1 NPT; PG:1/4 NPT; h:56.356 mm; Housing:SAFS 048 KA; Stabilizing ring:2 x A8897; Taconite seal:TER 551; End plug (suffix Y):X-5217-4; Max. speed for Taconite seal:340 r/min; P60°:557 kN; P90°:334 kN; P120°:207 kN; P150°:185 kN; P180°:222 kN; Pa:66.7 kN; Mass pillow block:245 kg; Cap bolt:1 1/4-7 UNC; Cap bolt recommended tightening torque:2467.6 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.25 in; Initial grease fill:2154.6 g; |
| 3.74 Inch | 95 Millimeter x 4.226 Inch | 107.34 Millimeter x 0.945 Inch | 24 Millimeter LINK BELT MA61019W935 Cylindrical Roller Bearings | da:215.9 mm; Da:359.999 mm; Ca:107.798 mm; A1:203.2 mm; A2:358.775 mm; ba:89.694 mm; H:419.1 mm; H1:209.55 mm; H2:85.725 mm; J min.:571.5 mm; J max.:635 mm; J1:127 mm; L:749.3 mm; N1:34.925 mm; R1:122.237 mm; R2:42.862 mm; RG:1 NPT; PG:1/4 NPT; h:56.356 mm; Housing:SAFS 048 KA; Stabilizing ring:2 x A8897; Taconite seal:TER 551; End plug (suffix Y):X-5217-4; Max. speed for Taconite seal:340 r/min; P60°:557 kN; P90°:334 kN; P120°:207 kN; P150°:185 kN; P180°:222 kN; Pa:66.7 kN; Mass pillow block:245 kg; Cap bolt:1 1/4-7 UNC; Cap bolt recommended tightening torque:2467.6 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.25 in; Initial grease fill:2154.6 g; |
| 4.331 Inch | 110 Millimeter x 5.234 Inch | 132.951 Millimeter x 1.496 Inch | 38 Millimeter LINK BELT MR1222 Cylindrical Roller Bearings | da:215.9 mm; Da:359.999 mm; Ca:107.798 mm; A1:203.2 mm; A2:358.775 mm; ba:89.694 mm; H:419.1 mm; H1:209.55 mm; H2:85.725 mm; J min.:571.5 mm; J max.:635 mm; J1:127 mm; L:749.3 mm; N1:34.925 mm; R1:122.237 mm; R2:42.862 mm; RG:1 NPT; PG:1/4 NPT; h:56.356 mm; Housing:SAFS 048 KA; Stabilizing ring:2 x A8897; Taconite seal:TER 551; End plug (suffix Y):X-5217-4; Max. speed for Taconite seal:340 r/min; P60°:557 kN; P90°:334 kN; P120°:207 kN; P150°:185 kN; P180°:222 kN; Pa:66.7 kN; Mass pillow block:245 kg; Cap bolt:1 1/4-7 UNC; Cap bolt recommended tightening torque:2467.6 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.25 in; Initial grease fill:2154.6 g; |
| 1.378 Inch | 35 Millimeter x 2.835 Inch | 72 Millimeter x 0.669 Inch | 17 Millimeter LINK BELT MR1207TV Cylindrical Roller Bearings | da:215.9 mm; Da:359.999 mm; Ca:107.798 mm; A1:203.2 mm; A2:358.775 mm; ba:89.694 mm; H:419.1 mm; H1:209.55 mm; H2:85.725 mm; J min.:571.5 mm; J max.:635 mm; J1:127 mm; L:749.3 mm; N1:34.925 mm; R1:122.237 mm; R2:42.862 mm; RG:1 NPT; PG:1/4 NPT; h:56.356 mm; Housing:SAFS 048 KA; Stabilizing ring:2 x A8897; Taconite seal:TER 551; End plug (suffix Y):X-5217-4; Max. speed for Taconite seal:340 r/min; P60°:557 kN; P90°:334 kN; P120°:207 kN; P150°:185 kN; P180°:222 kN; Pa:66.7 kN; Mass pillow block:245 kg; Cap bolt:1 1/4-7 UNC; Cap bolt recommended tightening torque:2467.6 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.25 in; Initial grease fill:2154.6 g; |
| 1.575 Inch | 40 Millimeter x 3.15 Inch | 80 Millimeter x 0.709 Inch | 18 Millimeter LINK BELT MR1208EX Cylindrical Roller Bearings | da:215.9 mm; Da:359.999 mm; Ca:107.798 mm; A1:203.2 mm; A2:358.775 mm; ba:89.694 mm; H:419.1 mm; H1:209.55 mm; H2:85.725 mm; J min.:571.5 mm; J max.:635 mm; J1:127 mm; L:749.3 mm; N1:34.925 mm; R1:122.237 mm; R2:42.862 mm; RG:1 NPT; PG:1/4 NPT; h:56.356 mm; Housing:SAFS 048 KA; Stabilizing ring:2 x A8897; Taconite seal:TER 551; End plug (suffix Y):X-5217-4; Max. speed for Taconite seal:340 r/min; P60°:557 kN; P90°:334 kN; P120°:207 kN; P150°:185 kN; P180°:222 kN; Pa:66.7 kN; Mass pillow block:245 kg; Cap bolt:1 1/4-7 UNC; Cap bolt recommended tightening torque:2467.6 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.25 in; Initial grease fill:2154.6 g; |