| REXNORD ZCS2107 Cartridge Unit Bearings | da:82.55 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:149.225 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:349.25 mm; N1:19.05 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:FSAF 518; Stabilizing ring:2 x SR-1518; Labyrinth ring:2 x LOR 189; End plug (suffix Y):EPR 11; Bearing limiting speed:5300 r/min; P60°:101 kN; P90°:60.9 kN; P120°:38.3 kN; P150°:34.7 kN; P180°:42.3 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:286.33 g; |
| TIMKEN MSM140BRHATL Cartridge Unit Bearings | da:82.55 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:149.225 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:349.25 mm; N1:19.05 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:FSAF 518; Stabilizing ring:2 x SR-1518; Labyrinth ring:2 x LOR 189; End plug (suffix Y):EPR 11; Bearing limiting speed:5300 r/min; P60°:101 kN; P90°:60.9 kN; P120°:38.3 kN; P150°:34.7 kN; P180°:42.3 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:286.33 g; |
| REXNORD ZCS2115 Cartridge Unit Bearings | da:82.55 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:149.225 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:349.25 mm; N1:19.05 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:FSAF 518; Stabilizing ring:2 x SR-1518; Labyrinth ring:2 x LOR 189; End plug (suffix Y):EPR 11; Bearing limiting speed:5300 r/min; P60°:101 kN; P90°:60.9 kN; P120°:38.3 kN; P150°:34.7 kN; P180°:42.3 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:286.33 g; |
| TIMKEN MSM125BXHATL Cartridge Unit Bearings | da:82.55 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:149.225 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:349.25 mm; N1:19.05 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:FSAF 518; Stabilizing ring:2 x SR-1518; Labyrinth ring:2 x LOR 189; End plug (suffix Y):EPR 11; Bearing limiting speed:5300 r/min; P60°:101 kN; P90°:60.9 kN; P120°:38.3 kN; P150°:34.7 kN; P180°:42.3 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:286.33 g; |
| REXNORD ZCS2200 Cartridge Unit Bearings | da:82.55 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:149.225 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:349.25 mm; N1:19.05 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:FSAF 518; Stabilizing ring:2 x SR-1518; Labyrinth ring:2 x LOR 189; End plug (suffix Y):EPR 11; Bearing limiting speed:5300 r/min; P60°:101 kN; P90°:60.9 kN; P120°:38.3 kN; P150°:34.7 kN; P180°:42.3 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:286.33 g; |
| TIMKEN MSM120BXHATL Cartridge Unit Bearings | da:82.55 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:149.225 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:349.25 mm; N1:19.05 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:FSAF 518; Stabilizing ring:2 x SR-1518; Labyrinth ring:2 x LOR 189; End plug (suffix Y):EPR 11; Bearing limiting speed:5300 r/min; P60°:101 kN; P90°:60.9 kN; P120°:38.3 kN; P150°:34.7 kN; P180°:42.3 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:286.33 g; |
| TIMKEN MSM130BRHATL Cartridge Unit Bearings | da:82.55 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:149.225 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:349.25 mm; N1:19.05 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:FSAF 518; Stabilizing ring:2 x SR-1518; Labyrinth ring:2 x LOR 189; End plug (suffix Y):EPR 11; Bearing limiting speed:5300 r/min; P60°:101 kN; P90°:60.9 kN; P120°:38.3 kN; P150°:34.7 kN; P180°:42.3 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:286.33 g; |
| TIMKEN MSM130BXHATL Cartridge Unit Bearings | da:82.55 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:149.225 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:349.25 mm; N1:19.05 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:FSAF 518; Stabilizing ring:2 x SR-1518; Labyrinth ring:2 x LOR 189; End plug (suffix Y):EPR 11; Bearing limiting speed:5300 r/min; P60°:101 kN; P90°:60.9 kN; P120°:38.3 kN; P150°:34.7 kN; P180°:42.3 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:286.33 g; |
| REXNORD ZCS2111 Cartridge Unit Bearings | da:82.55 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:149.225 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:349.25 mm; N1:19.05 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:FSAF 518; Stabilizing ring:2 x SR-1518; Labyrinth ring:2 x LOR 189; End plug (suffix Y):EPR 11; Bearing limiting speed:5300 r/min; P60°:101 kN; P90°:60.9 kN; P120°:38.3 kN; P150°:34.7 kN; P180°:42.3 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:286.33 g; |
| TIMKEN MSM115BXHATL Cartridge Unit Bearings | da:82.55 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:149.225 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:349.25 mm; N1:19.05 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:FSAF 518; Stabilizing ring:2 x SR-1518; Labyrinth ring:2 x LOR 189; End plug (suffix Y):EPR 11; Bearing limiting speed:5300 r/min; P60°:101 kN; P90°:60.9 kN; P120°:38.3 kN; P150°:34.7 kN; P180°:42.3 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:286.33 g; |
| TIMKEN MSM120BRHATL Cartridge Unit Bearings | da:82.55 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:149.225 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:349.25 mm; N1:19.05 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:FSAF 518; Stabilizing ring:2 x SR-1518; Labyrinth ring:2 x LOR 189; End plug (suffix Y):EPR 11; Bearing limiting speed:5300 r/min; P60°:101 kN; P90°:60.9 kN; P120°:38.3 kN; P150°:34.7 kN; P180°:42.3 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:286.33 g; |
| REXNORD ZCS2112 Cartridge Unit Bearings | da:82.55 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:149.225 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:349.25 mm; N1:19.05 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:FSAF 518; Stabilizing ring:2 x SR-1518; Labyrinth ring:2 x LOR 189; End plug (suffix Y):EPR 11; Bearing limiting speed:5300 r/min; P60°:101 kN; P90°:60.9 kN; P120°:38.3 kN; P150°:34.7 kN; P180°:42.3 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:286.33 g; |