1.938 Inch | 49.225 Millimeter x 4.625 Inch | 117.475 Millimeter x 3.25 Inch | 82.55 Millimeter DODGE SCHB-LT7-115 Hanger Unit Bearings
With over 10170 full-service stores, our 1.938 Inch | 49.225 Millimeter x 4.625 Inch | 117.475 Millimeter x 3.25 Inch | 82.55 Millimeter DODGE SCHB-LT7-115 Hanger Unit Bearings inventory is extensive and our parts COOPER BEARING LIMITED are priced right. within 24 1.938 Inch | 49.225 Millimeter x 4.625 Inch | 117.475 Millimeter x 3.25 Inch | 82.55 Millimeter hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
| Brand Name: | DODGE |
| Model Number: | SCHB-LT7-115 |
| Engineering Group: | Mounted Bearing |
| Bearing Number: | 22228 |
| Shaft Size: | 5 in |
| Shaft Size Type: | Imperial |
| Full Timken Part Number: | 99999B |
| Locking Style: | Single V-Lock |
| Weight: | 115 lb |
| Housing Style: | Four-Bolt Square Flange |
| PDF |
SCHB-LT7-115 |
Product Details
| Engineering Group | Mounted Bearing |
| Bearing Number | 22228 |
| Shaft Size | 5 in |
| Shaft Size Type | Imperial |
| Full Timken Part Number | 99999B |
| Locking Style | Single V-Lock |
| Weight | 115 lb |
| Housing Style | Four-Bolt Square Flange |
| UPC Code | 0883450338905 |
| Dimension BC | 14 in |
| Dimension C | 7.47 in |
| Dimension D | 11.190 in |
| Dimension E | 7.000 in |
| Dimension F | 16.5 in |
| Dimension H | 1.50 in |
| Dimension J (Bolt Size) | 1.125 in |
| Dimension G | 11.188 in |
| Dimension L Exp | 6.62 in |
| Dimension L Fix | 6.54 in |
| Dimension N | 5.450 in |
| Dimension RV | 0.72 in |
| Dimension SV | 5.82 in |
| C0 - Static Load | 237000 lb |
| C - Dynamic Load (Basic) | 194000 lb |
| e - Geometry Factor | 0.26 |
| Y1 - Geometry Factor | 2.62 |
| Y2 - Geometry Factor | 3.89 |
| Oil Lubrication - M/N Seal | 650 rpm |
| Oil Lubrication - T Seal | 1200 rpm |
| Oil Lubrication - B/C/O Seal | 350 rpm |
| Grease Lubrication - M/N Seal | 650 rpm |
| Grease Lubrication - T Seal | 900 rpm |
| Grease Lubrication - B/C/O Seal | 350 rpm |
| Float | 0.083 in |
| Shaft Tolerance | 0.0050 in |
| Eng Internal Radial Clearance - Min | 0.0063 |
| Eng Internal Radial Clearance - Max | 0.0079 |
| Pre Install Clearance Min | 0.0063 in |
| Pre Install Clearance Max | 0.0079 in |
