3.937 Inch | 100 Millimeter x 5.512 Inch | 140 Millimeter x 1.575 Inch | 40 Millimeter TIMKEN 2MM9320WI DUM Precision Ball Bearings
With over 10170 full-service stores, our 3.937 Inch | 100 Millimeter x 5.512 Inch | 140 Millimeter x 1.575 Inch | 40 Millimeter TIMKEN 2MM9320WI DUM Precision Ball Bearings inventory is extensive and our parts are priced right. COOPER BEARING LIMITED within 24 hours. This helps you maximize your productivity by saving time 3.937 Inch | 100 Millimeter x 5.512 Inch | 140 Millimeter x 1.575 Inch | 40 Millimeter N series: and your hard-earned dollars.
What is 2MM9320WI DUM bearing interchange？
| Brand Name: |
TIMKEN |
| Model Number: |
2MM9320WI DUM |
| Series: |
LM501300 |
| Cone Part Number: |
LM501349 |
| Cup Part Number: |
LM501314 |
| Design Units: |
Imperial |
| Bearing Weight: |
0.4 Kg |
| Cage Type: |
Stamped Steel |
| d: |
41.275 mm |
| D: |
73.431 mm |
| PDF |
2MM9320WI DUM |
Product Details
| Series |
LM501300 |
| Cone Part Number |
LM501349 |
| Cup Part Number |
LM501314 |
| Design Units |
Imperial |
| Bearing Weight |
0.4 Kg |
| Cage Type |
Stamped Steel |
| d |
41.275 mm |
| D |
73.431 mm |
| B - Cone Width |
19.812 mm |
| C - Cup Width |
16.604 mm |
| B |
21.430 mm |
| R - Cone Backface To Clear Radius1 |
3.560 mm |
| r - Cup Backface To Clear Radius2 |
0.76 mm |
| da - Cone Frontface Backing Diameter |
48.01 mm |
| db - Cone Backface Backing Diameter |
54.10 mm |
| Da - Cup Frontface Backing Diameter |
71.10 mm |
| Db - Cup Backface Backing Diameter |
65.02 mm |
| Ab - Cage-Cone Frontface Clearance |
1.8 mm |
| Aa - Cage-Cone Backface Clearance |
0.3 mm |
| a - Effective Center Location3 |
-3.3 mm |
| C90 - Dynamic Radial Rating (90 million revolutions)4 |
4360 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions)5 |
16800 lbf |
| C0 - Static Radial Rating |
16700 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 |
2980 lbf |
| K - Factor7 |
1.46 |
| e - ISO Factor8 |
0.4 |
| Y - ISO Factor9 |
1.5 |
| G1 - Heat Generation Factor (Roller-Raceway) |
23.3 |
| G2 - Heat Generation Factor (Rib-Roller End) |
13.3 |
| Cg - Geometry Factor |
0.0739 |