0.787 Inch | 20 Millimeter x 1.22 Inch | 31 Millimeter x 2.52 Inch | 64 Millimeter IPTCI SUCNPHA 204 20MM Hanger Unit Bearings
Hanger Unit Bearings offers a 0.787 Inch | 20 Millimeter x 1.22 Inch | 31 Millimeter x 2.52 Inch | 64 Millimeter IPTCI SUCNPHA 204 20MM Hanger Unit Bearings COOPER BEARING LIMITED selection of Genuine Hanger Unit Bearings 0.787 Inch | 20 Millimeter x 1.22 Inch | 31 Millimeter x 2.52 Inch | 64 Millimeter at 86 mm H2 Wholesale Prices. We are SCOE206-30 Designation of open end cover a 0.787 Inch | 20 Millimeter x 1.22 Inch | 31 Millimeter x 2.52 Inch | 64 Millimeter IPTCI SUCNPHA 204 20MM Hanger Unit Bearings Certified Parts Retailer
| Brand Name: |
IPTCI |
| Model Number: |
SUCNPHA 204 20MM |
| Series: |
736000 |
| Cone Part Number: |
EE736160 |
| Cup Part Number: |
736237 |
| Design Units: |
Imperial |
| Bearing Weight: |
83.200 Kg |
| Cage Type: |
Pin-Type |
| d: |
406.400 mm |
| D: |
609.524 mm |
| PDF |
SUCNPHA 204 20MM |
Product Details
| Series |
736000 |
| Cone Part Number |
EE736160 |
| Cup Part Number |
736237 |
| Design Units |
Imperial |
| Bearing Weight |
83.200 Kg |
| Cage Type |
Pin-Type |
| d |
406.400 mm |
| D |
609.524 mm |
| B - Cone Width |
79.375 mm |
| C - Cup Width |
65.088 mm |
| B |
87.313 mm |
| R - Cone Backface To Clear Radius1 |
7.870 mm |
| r - Cup Backface To Clear Radius2 |
6.35 mm |
| da - Cone Frontface Backing Diameter |
436.88 mm |
| db - Cone Backface Backing Diameter |
449.07 mm |
| Da - Cup Frontface Backing Diameter |
576.10 mm |
| Db - Cup Backface Backing Diameter |
569.98 mm |
| Ab - Cage-Cone Frontface Clearance |
8.1 mm |
| Aa - Cage-Cone Backface Clearance |
7.4 mm |
| a - Effective Center Location3 |
13.5 mm |
| C90 - Dynamic Radial Rating (90 million revolutions)4 |
100000 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions)5 |
387000 lbf |
| C0 - Static Radial Rating |
769000 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 |
59600 lbf |
| K - Factor7 |
1.68 |
| e - ISO Factor8 |
0.35 |
| Y - ISO Factor9 |
1.73 |
| G1 - Heat Generation Factor (Roller-Raceway) |
4176.8 |
| G2 - Heat Generation Factor (Rib-Roller End) |
536.6 |
| Cg - Geometry Factor |
0.21 |