1.938 Inch | 49.225 Millimeter x 4.625 Inch | 117.475 Millimeter x 3.25 Inch | 82.55 Millimeter DODGE SCHB-LT7-115 Hanger Unit Bearings
With over 10170 full-service stores, our 1.938 Inch | 49.225 Millimeter x 4.625 Inch | 117.475 Millimeter x 3.25 Inch | 82.55 Millimeter DODGE SCHB-LT7-115 Hanger Unit Bearings inventory is extensive and our parts COOPER BEARING LIMITED are priced right. within 24 1.938 Inch | 49.225 Millimeter x 4.625 Inch | 117.475 Millimeter x 3.25 Inch | 82.55 Millimeter hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
| Brand Name: |
DODGE |
| Model Number: |
SCHB-LT7-115 |
| Engineering Group: |
Mounted Bearing |
| Bearing Number: |
22228 |
| Shaft Size: |
5 in |
| Shaft Size Type: |
Imperial |
| Full Timken Part Number: |
99999B |
| Locking Style: |
Single V-Lock |
| Weight: |
115 lb |
| Housing Style: |
Four-Bolt Square Flange |
| PDF |
SCHB-LT7-115 |
Product Details
| Engineering Group |
Mounted Bearing |
| Bearing Number |
22228 |
| Shaft Size |
5 in |
| Shaft Size Type |
Imperial |
| Full Timken Part Number |
99999B |
| Locking Style |
Single V-Lock |
| Weight |
115 lb |
| Housing Style |
Four-Bolt Square Flange |
| UPC Code |
0883450338905 |
| Dimension BC |
14 in |
| Dimension C |
7.47 in |
| Dimension D |
11.190 in |
| Dimension E |
7.000 in |
| Dimension F |
16.5 in |
| Dimension H |
1.50 in |
| Dimension J (Bolt Size) |
1.125 in |
| Dimension G |
11.188 in |
| Dimension L Exp |
6.62 in |
| Dimension L Fix |
6.54 in |
| Dimension N |
5.450 in |
| Dimension RV |
0.72 in |
| Dimension SV |
5.82 in |
| C0 - Static Load |
237000 lb |
| C - Dynamic Load (Basic) |
194000 lb |
| e - Geometry Factor |
0.26 |
| Y1 - Geometry Factor |
2.62 |
| Y2 - Geometry Factor |
3.89 |
| Oil Lubrication - M/N Seal |
650 rpm |
| Oil Lubrication - T Seal |
1200 rpm |
| Oil Lubrication - B/C/O Seal |
350 rpm |
| Grease Lubrication - M/N Seal |
650 rpm |
| Grease Lubrication - T Seal |
900 rpm |
| Grease Lubrication - B/C/O Seal |
350 rpm |
| Float |
0.083 in |
| Shaft Tolerance |
0.0050 in |
| Eng Internal Radial Clearance - Min |
0.0063 |
| Eng Internal Radial Clearance - Max |
0.0079 |
| Pre Install Clearance Min |
0.0063 in |
| Pre Install Clearance Max |
0.0079 in |